Skip to main content

Step 3: Configuring your network components

Network components are a Cloud Commercial feature, as well as a Cloud Public Sector feature.

For web service connection​

To ensure the integration between UiPath and SAP works as expected, you must establish proper network communication between the two systems:

  • The integration uses the same communication channel and call structure in both directions, so there is no distinction between inbound and outbound traffic.
  • Communication from UiPath to the SAP system occurs over HTTPS, so the corresponding HTTPS port (typically 443) must be open.
  • The SAP system must have a valid, publicly trusted SSL certificate installed to support secure communication.
  • You must allow the following outbound IP ranges used by UiPath in your network configuration to enable communication with Test Manager.

Outbound IP ranges for web service connection​

note

Outbound IP ranges are a Cloud Commercial feature.

The list of allowed IPs can be consulted in the Test Manager section of the Configuring firewall topic.

For RFC connection​

For RFC connections between UiPath and your SAP system, you must allow the following IP addresses in your network configuration.

note

The integration uses standard SAP communication ports: 33xx and 32xx, where xx is your SAP instance number.

Outbound IP ranges for RFC connection​

note

Outbound IP ranges are a Cloud Commercial feature.

The list of allowed IPs can be consulted in the Test Manager section of the Configuring firewall topic.